Schaltnetzteil (Switch-Mode) • speziell für die Stromversorgung von Funksprechgeräten

Betriebsspannung	230 Volt-AC/ 50Hz
Ausgangsspannung	13,8 Volt DC
Ausgangsstrom	40 Ampere
Ausgangsstrom kurzzeitig	45 Ampere
Ripple & Noise	<50mV
Load Regulation	<200mV
Line Regulation	<50mV
Anzeigen & Messwerke	Zustands Bi-colour LED rot ( Störung ) und grün
DC Anschlussbuchsen	schraubbare Polklemmen auf der Rückseite
Kühlung	Zwangslüfter durch intregierten, variablen Lüfter, der sich automatisch bei zu hoher Temperatur zuschaltet
Schutzschaltungen	Überlastung, Übertemperatur, Kurzschluss- und verpolungssicher, Ausgangsspannungsschutz bei 16,5 Volt
Extras	Gehäuse aus Metall mit Gummistandfüßen, hohe Effizienz > 78% durch PFC (Dynamic Power Factor Correction) >0.95 maximiert den benötigten Strom, Hohe RFI Stabilität
Abmessungen(BxHxT)	220x110x300 mm
Gewicht	3,5 Kg

This series of high current, fixed voltage, regulated switching mode power supplies are built with, Over Voltage Protection for safe-guarding voltage sensitive load.
High efficiency cuts the running cost and active Power Factor Correction (PFC) maximizes the main's available power.
They are suitable for applications in telecommunications such as radio equipments, RF amplifiers, and other high current applications like car audio, halogen, xenon spot light demonstrations.
The high grade Screw On output terminals are on the back panel of the console while the power on off switch and the bi-colour LED indicator (Power On /Overload) is at the front. The variable speed thermostatic control cooling fan ensures quiet operation of the power supply in medium load condition.
The small size console fits well with the footprints of most modern telecom equipments.

High RFI stability
Over voltage protection at 16.5V
Current fold-back circuit with LED indicator
Short circuit protection
Over temperature cut off protection
High efficiency >78%
Power factor correction >0.95
Variable speed Thermostatic controlled fan quiet operation
Light weight and small size
Floating ground design

Type Switching Mode
Input Voltage 200-240VAC 50Hz~ (or on request)
Rated output power 552W
Number of output 1
Output Voltage range 13.8VDC
Output Current range 40A
Voltage load regulation =200mV
Voltage line regulation =50mV
Output ripple and noise =50mVp-p
Constant Current mode Yes
Optimal Efficiency >79%
Cooling Method Thermally control fan cool
Protections Overload, Over Temperature, Short Circuit Protection and Output Over Voltage Protection
Floating ground Yes
Dimensions (WxHxD) 220x110x300 mm
Gewicht: 3.5 kg

Bananenstecker schwarz 1,70 €

Bananenstecker rot 1,70 €